You are here: home > business smart card rfid key card
business smart card rfid key card
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
Model No.:
AT88SC6416CRF
Atmel long distance 13.56Mhz RFID Card , ISO / IEC RFID Smart Cards
</
Atmel long distance 13.56Mhz RFID Card , ISO / IEC RFID Smart Cards
Atmel AT88SC6416CRF 13.56 Mhz Cards
ATMEL RFID SMART CARD
IS014443B Protocol
Original chip
A Radio-Frequency Identification system has three parts:
- A scanning antenna
- A transceiver with a decoder to interpret the data
- A transponder - the rfid smart card - that has been programmed with information.
The security of your employees, facilities, networks and critical assets depends on advanced multi-application access control cards that can perform a wide range of tasks.
1. Features
- One of a Family of Devices with User Memory of 1 Kbit to 64 Kbits
- Contactless 13.56 MHz RF Communications Interface
- ISO/IEC 14443-2:2001 Type B Compliant
- ISO/IEC 14443-3:2001 Type B Compliant Anticollision Protocol
- Command Set Optimized for Multicard RF Communications
- Tolerant of Type A Signaling for Multiprotocol Applications
- Integrated 82 pF Tuning Capacitor
- User EEPROM Memory
- 64 Kbits Configured as Sixteen 512-byte (4-Kbit) User Zones
- Byte, Page, and Partial Page Write Modes
- Self-timed Write Cycle
- 256-byte (2-Kbit) Configuration Zone
- User-programmable Application Family Identifier (AFI)
- User-defined Anticollision Polling Response
- User-defined Keys and Passwords
- High-Security Features
- 64-bit Mutual Authentication Protocol (under license of ELVA)
- Encrypted Checksum
- Stream Encryption
- Four Key Sets for Authentication and Encryption
- Eight Sets of Two 24-bit Passwords
- Password and Authentication Attempts Counters
- Selectable Access Rights by Zone
- Antitearing Function
- Tamper Sensors
- High Reliability
- Endurance: 100,000 Write Cycles
- Data Retention: 10 Years
- Operating Temperature: 40°C to +85°C
4. Communications
- All personalization and communication with this device is performed through the RF interface.
- The IC includes an integrated tuning capacitor, enabling it to operate with only the addition of a single external coil antenna.
- The RF communications interface is fully compliant with the electrical signaling and RF power
specifications in ISO/IEC 14443-2:2001 for Type B only. Anticollision operation and frame formatting
are compliant with ISO/IEC 14443-3:2001 for Type B only.
- ISO/IEC 14443 nomenclature is used in this specification where applicable. The following abbreviations are utilized throughout this document. Additional terms are defined in the section in which they are used.
- PCD Proximity Coupling Device: the reader/writer and antenna
- PICC Proximity Integrated Circuit Card: the tag/card containing the IC and antenna
- RFU Reserved for Future Use: any feature, memory location, or bit that is held as reserved
for future use
- $ xx Hexadecimal Number: denotes a hex number xx (Most Significant Bit on left)
Smart Card Parameter
| Material: | PVC/ABS/PET/Paper |
| Size: | ISO CR80 standard(85.5mm x 54mm) or customized |
| Thickness: | 0.8-0.84mm |
| Minimum QTY: | 500pcs. |
| Chips Available: | NXP S50/S70/Ultralight /Desfire 1K/2K/4K/8K/Fudan chip/ ICODE 2/Ntag203 etc |
| Operating Frequency: | 13.56Mhz |
| Standard: | ISO14443A/ ISO14443B/ISO 15693 rfid card |
| Read Times: | >100 000 |
| Available Crafts: | 4 color off-set printing, magnetic stripe, embossing number, signature panel, photo, barcode, thermal printing, gold/shiver color scratch-off, series number punch, hole punched, UV printing, etc. |
| Surface: | <
